Cookie policies
CDP-4D - Piercing Connector for 4 Taps
Purpose: It allows multiple cable connection (up to four) per connector. Suitable for aluminum to aluminum, aluminum to copper or copper to copper connections (low voltage 1kV).
Characteristics: Connection by piercing the insulation (simultaneous tightening), no stripping of the cable insulation (run side only) and independent taps by tightening. Used with 0.6 / 1kV XLPE / PE insulated aluminum cables or 450 / 750v PVC insulated copper cables (without cover). Allows connection for public lighting.
Application: Overhead insulated power distribution lines.
Material: Piercing connector cover in weatherproof and U.V. rays resistant polymer. Contact of run side in copper and tap side in aluminum alloy.
Application Tool: 5mm allen key for tap side and star or socket wrench for run side.
Note: It is recommended to adapt the combination of the tap gauges not to exceed the maximum cross section of 120mm².
Technical Chart
Technical specifications of our products
INTELLI Code | Conductors | Datasheet | |||
---|---|---|---|---|---|
Run | Tap | ||||
mm131 | AWG/MCM | mm131 | AWG/MCM | ||
CDP-120-40 | 25 - 150 | 4 - 300 | 1,5 - 35* | 16 - 2* | View |