Cookie policies
Product Categories
Product Categories / Insulation Piercing
- Bimetallic Stranded Wires expand_more
- Aluminum Stranded Conductors expand_more
- Ground Rods and Accessories for Grounding expand_more
- Terminals expand_more
- Splice Sleeves expand_more
- Pre-Insulated Terminals expand_more
- Connectors expand_more
- Clamps expand_more
- Tooling expand_more
Showing 6 out of 6 results
Exhibition:
Order by: Greater Relevance
expand_more
Purpose: Tap of Insulated Cables, suitable for combinations aluminum to aluminum, aluminum to copper and copper to copper in overhead power distribution lines (low voltage up to 1kV).
Characteristics: Insulation piercing connection (no stripping of cable insulation required). Used with 0.6/1kV XLPE/PE insulated aluminum cables or 450/750v PVC insulated cables (without cover). It has a fuse nut to ensure a perfect connection. It has elastomeric rubbers, making the connector watertight.
Application: Overhead insulated power distribution lines.
Material: Polymer connector resistant to weather and U.V. rays. Tin plated copper contacts.
Application Tool: Star or socket wrench.
Purpose: Connection between input branch (Flexible copper cable Class-4/5 - PVC insulation 450 / 750v without cover) and connection branch (multiplexed CA aluminum conductors - XLPE / PE 0.6 / 1kV - phase and neutral (insulated or bare).
Characteristics: Connection by piercing (no need to strip the insulation from the cable). It has a shear head nut to ensure a perfect connection. It has compensation springs that ensure a constant pression in the connection.
Application: Overhead insulated electricity distribution networks.
Material: Polymer connector resistant to weather and U.V rays. Tin plated copper contacts.
Application Tool: Star or socket wrench.
Purpose: Cables tapping. Suitable for connection to the main / trunk (bare line) and tap (insulated line). Suitable for aluminum to aluminum, aluminum to copper or copper to copper connections (low voltage up to 1kV).
Characteristics: Connection by piercing the insulation only on the tap side (there is no need to strip the cable insulation). It has a shear head nut to ensure a perfect application.
Application: OVERHEAD power distribution lines bare (run side) and insulated (tap side).
Material: Weatherproof polymer and U.V. connector, tin plated copper contacts.
Application Tool: Star or socket wrench.
Purpose: Covered cable tap (protected network)
Characteristics: Connection by piercing (does not need to strip or rebuild the insulation of the conductor). Suitable for covered aluminum cables. It has a shear head nut to guarantee a perfect application and elastomeric rubbers, making it watertight.
Application: Protected overhead electricity distribution networks (medium voltage)
Material: Polymer body resistant to weathering and UV rays. Main contact and tap in tinned copper.
Application tool: 17 mm socket wrench.
*Available on request
Purpose: Tap of protected network (medium voltage) to shear head switch or transformer using a live line clamp on the stirrup.
Characteristics: Connection by piercing (does not need to strip or rebuild the insulation of the conductor). Suitable for covered aluminum cables. It has a shear head nut to guarantee a perfect application and elastomeric rubbers, making it watertight.
Application: Protected overhead electricity distribution networks (medium voltage)
Material: Polymer body resistant to weathering and UV rays. Stirrup, main contact and tap in tinned copper.
Application tool: 17 mm socket wrench.
*Available on request
Purpose: It allows multiple cable connection (up to four) per connector. Suitable for aluminum to aluminum, aluminum to copper or copper to copper connections (low voltage 1kV).
Characteristics: Connection by piercing the insulation (simultaneous tightening), no stripping of the cable insulation (run side only) and independent taps by tightening. Used with 0.6 / 1kV XLPE / PE insulated aluminum cables or 450 / 750v PVC insulated copper cables (without cover). Allows connection for public lighting.
Application: Overhead insulated power distribution lines.
Material: Piercing connector cover in weatherproof and U.V. rays resistant polymer. Contact of run side in copper and tap side in aluminum alloy.
Application Tool: 5mm allen key for tap side and star or socket wrench for run side.
Note: It is recommended to adapt the combination of the tap gauges not to exceed the maximum cross section of 120mm².